RAV-EX-U40-Tx allows USB-C video resolution of 5K combined with USB 3.2 signals to be sent up to 40m. Accommodating 100w charging and providing access to three remote USB device ports allowing peripherals such as cameras, speakerphones, printers, and keyboard & mouse to be connected to the host laptop.
RAV-EX-U40-Tx is a high performance HDBaseT transmitter.
It allows transmission of full USB-C signal (Video up to 5K and USB 3.2 data) at distances of 40m via single Cat6a cable.
A single USB-C input supports DisplayPort Alt mode 1.4a and provides 100W of power delivery to the connected laptop compliant with USB-C PD 3.0.
In addition the product supports RS-232 signal pass-through, analogue audio de-embedding and bi-directional 24V PoC (Power over Cable).
The product can be combined with the RAV-EX-U40-Rx for USB-C video output or the RAV-EX-H40-Rx for HDMI video output.
Laptops connected to the transmitter can access peripherals connected to the 3x USB ports from either receiver.
User Manual.pdf
API Commands Guide.pdf
Application Diagram.jpg
| Inputs: | 1x USB-C, 1x 24V PoC, 1x RS-232 3-pin connector. |
|---|---|
| Outputs: | 1× 3.5mm audio jack, 1× HDBaseT RJ45 connector. |
| Features: | • 5K full USB-C and USB3.2 extender with USB-C input. • Extended distance is up to 40m/130ft for 4K signal, 35m/115ft for 5K signal via a single CAT6a cable. • Compliant with VESA DisplayPort 1.4a. • Up to 100W charging. Compliant with USB-C Power Delivery 3.0. • Supports USB 3.2 Gen 1 with data transfer rate up to 2.5 Gbps. • Features one full USB-C input, supporting DP Alt mode standards. • Analogue audio de-embedding. • RS-232 pass-through. • Bi-directional 24V PoC (power over cable), when TX or RX gets power, the other end does not need an external power supply. (Note: USB-C charging is supported only when TX gets power supply). |
| Country of Origin: | China |